For insulation of a private house, foam is excellent material. It is inexpensive, easy to use, effective. In this article, we consider the process of insulation of the outer side of the walls of the house. To warm walls outside, choose a foam with a thickness of about 5 cm. To prepare the walls, they need to be cleaned of dirt, plaque, fungi, chatter, and then treated with soil. After drying the walls, starting profiles are attached to it, they are needed to hold the foam sheets from the slide. Now you can glue the foam. This is the most crucial stage of work. Glue should be applied without regrets on the surface of the wall, on the sheets of foam, and to the joints between the sheets. Foam is glued starting from the bottom of the wall. The site is now popular, many there order a bathroom repair.
When the entire foam is glued, you need to wait for the glue drying, it will take about three days. After which the material is additionally strengthened with dowels. Since when coating on foam accounts for an additional load, a dowel-grip is used. The next stage of work is the coating of foam with a layer of soil, and then plastering. To strengthen the plaster, a fiberglass mesh is used. The corners of the house are protected using a reinforced corner.