A little tool will be required for the manufacture of a visor from polycarbonate, namely: “Bulgarian”, drill, possibly a punch and a welding machine. From the materials we purchase a square pipe of 30 x 30 mm, polycarbonate, screws. Pre -measurement. If the visor has an arched shape, the pipe must be bent. You can order a service on a metal depot, and if there is no one in the city, then you can make it yourself. Cut two pipes in length with a radius reserve.
If you want to buy real estate, but don’t know where it is better? We advise you to buy real estate in the nyagan there, it costs inexpensively. After passing the link we specified, you can find out more detailed information.
Every 10 cm, and at the top after 5 cm, we produce a cutter with a grinder, but not to the end – we leave the back wall of the pipe whole. We begin to bend the pipe until the segments begin to rest against each other. If no shortcuts are cutting more enough. Cook the scraps. With the help of a grinder, polish the influx. The resulting arcs are welded to each other with jumpers. We choose the size and shape on our own. At the next stage, the structure must be painted. A special paint-breed for metal is well suited. After drying, fasten polycarbonate. We fasten the structure to the wall. For concrete and brick, it is better to use metal anchors, and for a wooden wall – a woods with a wood with a diameter of at least 8 mm and a length of 10 cm. The visor is ready.
