Repair of tiles
This is a fairly expensive event. But this method of renovation of wall surfaces should be resorted to when the unsatisfactory condition is observed no more than 10% of the surface. And chips, dents, and cracks on a larger area may be able to push the owner on the thought of conducting a large -scale repair project with a 100% replacement of all finishing materials, rakes and tiles.
In general, the main difficulty in the repair of tiles is the maximum preservation of the surface of the walls on which such tiles are glued. Inaccuration during the initial stage of repair can lead to the formation of significant damage in the wall surfaces. And as a result, to an increase in time to end such a replacement of tiles by increasing the time to bring the walls to the form, when it will be possible to fix the tile.
If you do not adhere to this principle in carrying out such repair measures, then the final cost of the repair can grow in price by 2 times due to the fact that it will be necessary to purchase various construction mixtures for leveling walls and shallowing holes made by the electric carrier. Therefore, the separation of tile fragments from wall surfaces that have become unusable must be carried out manually, using a pair of a hammer, a chisel.
Or if the working situation allows, then the chisel and rubber kiyanka. Usually, during the initial installation, the tile is best grasped in the center, in this place there is the most durable mount. Therefore, tapping, in order to remove the necessary fragment, must be done at the edges.
