Select and buy paint, but we should not forget that for painting frames is used paint for external work. From the window frame you need to remove the old paint using the spatula, then carefully, slowly, fill in the cracks and cracks. The junction of the glass with the frame must be treated with silicone sealant. Be sure to put absolutely all the irregularities and let the applied putty dry, then treat the entire surface of the frame with fine -grained sandpaper paper. If the painted frame has been painted earlier many times, then it is strongly recommended to build it slightly in the places of closing with a window sash.
Looking for a good company that conducts the installation of video surveillance systems inexpensive? We advise you to visit our site and order the installation of a video surveillance system at a reasonable price.
Wash window binders and frame first with soap warm solution, and after that clean water. Wipe the whole frame with a soft rag and wait for its drying.
Be sure to unscrew all the accessories. Pull the frame and put it exactly on the horizontal surface.
Paul should be covered preferably with plastic film, you can use old newspapers. On the perimeter of the frame on the glass, stick a painting tape. It is advisable to paint in gloves.
Strengthen the frame with the outer part. Using a round small pholen brush, slowly paint the corners and thin binders. Now very often they began to order the installation of video surveillance systems, this service is inexpensive, and everyone can allow it. In addition, she helps to protect the house from thieves.
Strack sequentially at first the upper, and only then the lower side of the window binding, while using a wide brush. After that, paint the sidewalls of your frame.
Maslar tape must be removed before the paint begins to dry and let the coating dry. Remove all pollution from the glasses using the solvent. The second time stain the frame after drying the paint of the first layer.
The inside of the frame is painted similarly to the outer.
