Boiler – an indispensable thing in the houses there are interruptions with the supply of hot water. Typically, the water heater includes brackets and dowels, so you will not have to buy. To make holes you need a drill and a punch. First we determine the location and mark it on the wall. Typically, water heaters are installed above the bathroom, sink or washbasin. In the marked place, drill a hole and fasten the bracket. We mount a boiler on the bracket, planting it on special holes. A boiler like any other household appliances requires space in the apartment. Since, modern boilers have a lot of dimensions quite considerable, the question of finding a place for a boiler often arises. When designing houses of Soviet years, the designers did not take into account the possibility of installing a boiler in the apartment, since in those days few used boilers. But now, even projects of economy class houses are developed taking into account the possibility of the availability of modern household appliances in the premises, including boilers.
This is followed by a very important stage of operation – connection to water supply. We wind the hose of the desired diameter to the drainage of water with the tap, putting the gaskets for tightness. On the input of the water, which is marked in blue, we install the safety valve. In the future, this valve can be used in emergency situations to drop excess pressure. The output for hot water, marked with red, is connected to the mixer. After installing the system, the water heater is filled with water to shift the air. Then we lower it and wait until the water with air bubbles ceases to get out of the drain. Only after that we fasten the hose to the tap. When the system is checked, and the water heater is completely installed, it can be connected to electricity.
