There is no doubt that one of the most common wall covering options, wallpaper. They are practical, affordable, and repair work with their use is not very complicated. In addition, work does not require physical strength or special skills. Nevertheless, if you are going to glue yourself, you should know about several moments.
First you need to prepare the walls. To do this, they degrease, all irregularities, defects are eliminated, as they can interfere with work. It is important to dismantle skirting boards. Most forgets to do this and glues wallpapers right on them. So you only ruin the appearance of the room, and the work will be done in vain.
If there were wallpaper on the walls earlier, they must first be torn off, for example, using hot water. If it doesn’t work out, buy special tools designed for particularly difficult cases. As you can see, the repair and decoration of the apartment, in particular, gluing wallpaper, are not a very easy occupation.
To avoid irregularities, bubbles and achieve the smoothness of the walls, you need to adhere to the norms and rules regarding the wallpaper you use. As a rule, rolls contain a maximum of the necessary information, it should be adhered. For gluing, use any of the two existing technologies: VSTOK or into the impact.
In the first case, you need to carefully press the edges of pieces of neighboring wallpaper. As a result, get a very good result. The technology of gluing into the attack is used for wallpaper in which you need to combine patterns to get the effect of two drawings. In this case, it is impossible to allow the edges to come to each other more than 5 mm, otherwise the bulges will be noticeable.
