AProject
  • Ideas for giving
  • Construction
  • Home Ideas
  • Repair
  • Design
  • Real estate
  • Finishing
ECOBuild – all about construction
  • Ideas for giving
  • Construction
  • Home Ideas
  • Repair
  • Design
  • Real estate
  • Finishing

The correct selection of the generator is the key to successful work

  • May 19, 2017

Often there is a need to use autonomous or reserve power sources, generators. For the right choice, you need to answer a few questions. Then all the characteristics will be selected correctly and the equipment will last a long time. Or you can contact specialists, for example, the company Energo Integra, having extensive experience in the energy source market.

The tasks performed

If consumers of electricity do not have access to a centralized network, then an autonomous power source is needed. And if a generator is needed in order to protect sensitive equipment from shutdowns, a backup option will be required. Differences are in the duration of continuous work.

Power

The minimum load on the generator should be 25% of its full power. Otherwise, the equipment will quickly become unusable. Therefore, it should be chosen respectively by the capacities of all consumers at a connected facility, while leaving a reserve for the future increase in the served equipment.

One – or three -phase voltage

When using household appliances, a single -phase voltage generator will be enough. And in the case of an industrial object, it is better to choose a source with a three -phase. However, powerful three -phase generators can be used to ensure a single -phase network.

Place of application

If you need an autonomous power source, a room with a stable temperature and good ventilation should be provided. However, this is not always possible. In this situation, it is necessary to choose an all -weather generator capable of plating temperature changes and which does not affect the effects of the environment.

In the case of reserve nutrition, select generators operating at room temperatures or are in a special trailer with a protective casing. This provides the possibility of immediate inclusion in the network, which is excluded with an in -working engine.

Duration of work

Continuous work without intervention can be ensured by increasing the sources of fuel and its continuous supply. This is possible with stationary units by installing a large tank. The longer the continuous operation of the autonomous power plant, the higher its cost will be. And the choice must be made appropriate.

Taken on the site of the site .

Share
Tweet
Pin it
Share
Share
You May Also Like
View Post

Wall decoration with porcelain tiles: rules, options and

  • March 3, 2025
View Post

Laminate on walls: options and installation rules

  • March 3, 2025
View Post

White finishing materials for walls: how to choose

  • March 3, 2025
View Post

Proper ventilation equipment in the bathroom

  • January 22, 2025
View Post

Doors installation rules

  • January 22, 2025
View Post

How to choose high -quality PVC pipes

  • January 22, 2025
View Post

Processing by stone floor

  • January 20, 2025
View Post

Polycarbonate visor

  • January 15, 2025
Featured Posts
  • The sheathing of a metal staircase
    • December 22, 2017
  • Choosing a home heating system
    • October 16, 2017
  • Asbestos direct slate
    • December 3, 2024
  • How to choose a roof yourself
    • December 10, 2024
  • The pros and cons of the interior decoration of the walls of cement-sand plaster
    • January 25, 2018
Recent Posts
  • Decorative jointing: features, technology and rules
    • March 3, 2025
  • Features of repairing a crack in a floor screed
    • March 3, 2025
  • Selecting plaster for finishing ceilings and application techniques
    • March 3, 2025
ECOBuild – all about construction
  • © ECOBuild – ecobuildit.com, 2017-2024.

Input your search keywords and press Enter.