Content
Quickly and efficiently allow you to make wall repair modern colors. They have long ceased to be toxic, making the room uncomfortable outwardly.
So where to start initially? It doesn’t matter what you will get paint, because the walls prepare everything in the same way:
– need to be cleaned from the old coating and of course from pollution
– It is necessary to swap holes, hollows and various pits
– Also, you can put a new plaster
– or apply a layer of putty.
If your walls are covered with wallpaper, in this case you need to remove them and clean the surface from the past glue. You can simplify yourself a lot of work, for this we advise you to wet the old wallpaper with warm water using a foam sponge. When there are some irregularities, do not worry, all this can be leveled by putty. About how to remove old wallpaper from the walls in details can be found here.
The work is performed in the following sequence:
– first you need to process everything with a primer
– Get the starting putty
– Process again with a primer
– cover the last layer of putty
– clean the sherkhinity with a small sandpaper
– Treatment with a primer is for subsequent staining.
If there is an old paint on the wall, it will need to be removed with a special grinder. But as for the oil paint, we recommend that you warm it up, for example, with a hairdryer. After all this, you will have to remove it with a spatula. The water emulsion is blurred with highly hot water. And it will be necessary to act in the same way if you have walls, for example, whitewashed.
How to competently paint the walls in the apartment?
Plastering before painting
Know that any surface before painting must be placed. It is simply unrealistic to paint naked concrete or brick, before that, you need to make reinforcement with a painting grid. It will prevent cod in plaster and provide it with perfect integrity, and all layers before and after you need to primer.
The next step in work should be putty. This must be done without fail in order to ensure the maximum smooth surface of the white color. You probably ask what the thickness of the layer should be? So:
– plaster 2-5 centimeters
– Starting putty 0.5-1 centimeter
– finish putty 0.2-0.3 centimeters
What paint to choose for the walls of the apartment?
Paints are divided into the following components:
– enamel
– Water -based
– Oil
– glue
We recommend that we use naturally water emulsions, as they dry very quickly and are completely not toxic. Another plus of water emulsion: you yourself have the right to choose a color saturation for your apartment.
Before choosing a color, you should not forget about the design of your room. Remember that for a small room it is best to choose light tones and shades in order to visually increase the scale.
Painting process
Our advice: start working with pasting with a painting tape. After that, you need to paint the surface along the tape with a brush, but in no case you need to go beyond its boundaries. Wash the brush in the bath and squeeze a little. Pass on the wall in different directions, so that there are no stripes. If you want to get acquainted with the full technology of staining walls, we recommend that you post this section of the specialized resource “Domgvozd”.
How to competently paint the walls in the apartment?
5 (100%) 1