Parquet board is an ideal solution for those who want expensive flooring, but cannot afford it. It consists of several layers, and only the upper layer is made of expensive wood. Thanks to this, it costs much cheaper than piece parquet and massive parquet board. In addition, the installation of a parquet board is also very simple and cheap. If desired, you can cope with this task yourself without spending extra money on professionals services. The parquet board is laid according to the same type as the laminate. The main requirement is that the floor is even. You can put it on both a screed and a plywood base, lags or an old parquet or wooden floor.
Looking for a good site on which you can rent a diesel generator? We have a diesel generator rent on our site, more details will not be superfluous to find out about it.
No parquet glue is needed. The only thing you can use is a substrate that will “soften” minor irregularities on the floor. Begin to install from the corner along the wall. First, the first board is assigned to the wall, and the second is connected to it by the edge. So to the end. The final board is cut off and adjusted in size. The next row should start with the tog of the very one from the first row of a piece of the board. After laying the boards, nailed to the floor at the corners. This is all the work, no cycling and surface processing is required with varnish.
Minor irregularities on the floor. Begin to install from the corner along the wall. First, the first board is assigned to the wall, and the second is connected to it by the edge. So to the end. The final board is cut off and adjusted in size. The next row should start with the tog of the very one from the first row of a piece of the board. After laying the boards, nailed to the floor at the corners. This is all the work, no cycling and surface processing is required with varnish.
