In order to paint the floor, you need to adhere to a few simple rules. Firstly, the floor for staining must be specially prepared. To do this, make sure that the surface for staining is dry and completely clean. Paul boards should not have deep cracks, but if any, they must be covered with a special tool. Little sinking for processing slots can be purchased in specialized stores or prepared at home.
To smear the cracks or cracks in the floor, they must also first prepare them. To do this, thoroughly clean the cracks of dust and other contaminants, dry and only then lay the putty. In this case, the putty should be hot, it will need to be laid in the cracks tightly enough so that the floor is as even as possible. After the putty has cooled and hardens the floor surface will need to be polished so that it becomes more even and smooth. By the way, it will not be superfluous after the repair to visit the cottage and start building a bathhouse there, or you can buy a ready -made bath here .
Secondly, after such preparation of the floor surface for staining, it will be necessary for a start for the first time, and preferably 2 layers, after which the floor must be well dried. And only after these procedures can you begin to direct flooring. Thus, observing the above recommendations, the painted floor will look much better, and the paint will last much longer.
