With the constant operation of wooden products – whether it is windows, doors, skirting boards and platbands, they must be periodically updated. But there are a number of special conditions, compliance with which will increase the service life of these products and make the coloring process more pleasant.
If you want to draw up a Tinkoff card, then you should follow the following link. There you can arrange a Tinkoff card via the Internet. This is a very convenient option for drawing up credit cards from Tinkoff.
If you first stain window frames, wooden table or shelf, then they need to be primed. To do this, you can use both the Olifa and an oil -based antiseptic. And only after the primer is completely dry, you can proceed to applying the paint.
If you just need to update the carpentry products, then when the paint does not fly away, you just need to treat damaged places with putty on wood, after drying, grind the entire surface with a fine -grained skin. The next step will be to clean the surface from various contaminants and rubbing the solvent. And you can start painting. First you need to apply a primer, and then a layer of paint. If you just decide to update the product, it is enough just to treat with sandpaper, erase dust and paint.
If the paint exfoliates, then it must be ripped off from the surface with a spatula or coarse -grained skin, and repeat the following stages.
Each layer of paint must be applied after the previous one dries and it is better to use brushes with soft bristles.