To prepare a solution of glue for the installation of foam, it is necessary to pour water into the bucket and pour glue, after which the contents of the bucket are mixed with a corolla and drill. The solution should not be crumbly; it must be quite viscous. If the walls are even in your house, it is better to use a spatula with teeth to apply a glue mixture to apply a glue mixture to a foam. If the house is brick, you can get by with the most ordinary spatula.
It is best to read the installation of foam plates from straight walls, and then move on to other complex areas. The walls need to be treated before adhesive foam with a primer. Before fixing the plates using screws and dowels, we recommend that the glue dry. Usually it can go to it for about a few days. The length of the drill is determined depending on the thickness of the settled foam. Everything you need can be purchased at any construction store, because the sale of construction equipment is very common today.
If you do not have experience with plaster, we recommend that a solution is a more liquid solution. It is best to start plastering with dents and cracks from dowels. The finish layer is best applied not immediately, but only after completely drying around the entire perimeter of the house of the starting layer.
Separately talk about decorative plaster. If you do not have much experience in such repair work, it is best to invite professional plasters for this procedure, since due to non-fulfillment of any conditions or improper preparation of plaster, the material that is applied to the wall can ruin the appearance of the structure and crack. After drying on the walls of decorative plaster, you can start painting walls.
