To make a cornice, you will need to make several mounts and a cornice from a furniture slab. First you need to determine the length and width of the cornice, and only then with the help of a grinder you need to cut out two stripes of a certain size. Then, bend one edge under the degree of 90, and the other in the opposite direction. Before bending, you need to mark. Take the corner and at a distance of 70 mm. On this line, click the strip in Teski and, using the hammer, bend each side in turn.
Want to know how to configure a concrete vibrator yourself? We advise you to visit our site and we find out all the information you are interested in.
The base of the cornice itself can be made from the old cabinet. Using a saw, saw a shield and cut the necessary workpiece. The edge can be glued with furniture tape, while the tape must be heated, and not use glue. With the help of a newspaper and an iron, she is well taken for the workpiece. Then, it is necessary to cut the edges and walk with sandpaper. Further, the finished cornice is marked along the window, it is better to do it with someone’s help, so that the walls and ceiling are in level. Having outlined where to drill holes, make them a drill with a winning attack, then insert them, Sarmatians and tighten the cornice. Curtains can be hung on the fishing line, because they are very light enough.
