Nowadays, not everyone can afford to purchase a new bath. But what if the old has long lost its presentable appearance and has become like a broken trough from a fairy tale? There is a way out! Having decided to update the enamel of the bath on their own, you can significantly save on the services of the master. In this case, it is only necessary to purchase all the necessary materials and be accepted for work.
If you are interested in time management for the entrepreneur, then you can find out everything about him on the site – . Pass the link we specified and you will find useful tips and find out a lot of interesting information about time management for the entrepreneur, etc. D.
First, you should get rid of the old coating. You can do this by using a drill and a grinding circle. It is necessary to work in the respirator, regularly wetting its surface with water.
After removing the upper layer, the surface of the bath must be degreased. To do this, wipe the bath with soda and rinse it with hot water. For rinse, you can use cold water, but then the bath will dry much longer than when using hot.
Do not sit idle and wait until the bath dries. At this time, you can slowly start preparing paint. To create the effect of impeccable whiteness, it is necessary to mix blue kner and solvent, add white enamel and pour five milliliters of hardener into the resulting mixture.
A special technology of staining will help to avoid the formation of fluxes when staining, which consists in the fact that the paint is applied with wide strokes first in the horizontal direction, and then in the vertical. The brush should not lose the pile during the painting process. To do this, it must be processed in advance. If, nevertheless, some hair comes to the surface of the bath, it can easily be removed with a sewing needle.
To obtain a good effect, you need to apply at least two layers of enamel: primer and glossy. It will be possible to use the bath as a purpose no earlier than three to four days.
