How to build a garage roof?

In our country, very many people have been allowing themselves to buy a car. After the purchase, many begin to think where they will put the car? There are many groups in such a social network as VKontakte in which you can familiarize yourself with the features of the construction of the garage.

After all, garages can be made completely different and you can also cover them with different materials. Roofs were more often and more often began to make from transparent material. The advantage of such a roof is that in the garage you can work in daylight without additional lighting.

In order to make such a roof you need:

– Drill;

– Screwdriver;

– Roulette;

– Felt -tip pen;

– Screws;

– Sealing rings;

– Transparent plastic;

– Profiled foam;

– Sealant.

Instructions.

1. Using a roulette, measure the size of the garage roof. It is necessary to mark the roofing in such a way that it can be placed in an overlap. The width of the overlap should be 1.5 centimeters. Flamaster Mark the cut line. It must be remembered that the new end must be adjacent to the edge of 90 degrees.

2. Drill a hole for the screws in the sheets. Start fix the sheets with screws. They need to screw them into every second crest of the sheet. At the same time, do not overdo it with tightening screws, since plastic is very fragile material. It is best to fasten with a screwdriver.

3. When installing between the walls and the roof, it is necessary to install sealing rings and plastic caps. If an additional seal is needed, then you can use professional foam.

4. If the roof is under the slope, then under the overlap you need to blow with sealant.