Usually linoleum in the apartment is laid in two ways – using glue and without it.
Let’s start considering the option in which we need gluing linoleum. This method is most often used when two pieces of linoleum are used for one room.
Before the start of gluing, it is necessary that linoleum will lay down and leveled off. First, it is laid first, while it should go to the wall by 5-7 cm. This is necessary for further fitting for the room to be more convenient. When the linoleum is leaving, it can be cut, while it is necessary that it does not reach 0.5-1 cm to the wall.
Then half a piece of linoleum is bent and spread it with glue. After that, given the instructions for the glue, the smeared part should be kept in the air for some time, then put in place and squeeze the air with a wide brush or a special ironer. The remaining pieces of linoleum are also glued. The next recommendations of the glue instructions, the floor is left to dry for a while, approximately 1-2 days. After the desired time, the skirting board is installed.
In the event that a room is small and 1-2 pieces are enough for it, they do without gluing. In this case, a bilateral adhesive tape is used to avoid peeling off linoleum.
If you need to use from 2 or more pieces, then the seams must be glued with liquid designed for cold welding of the seams. But this must only be done after glue has dried. Before starting the welding of the seam, adhesive tape is glued to it. Then it needs to be cut along the length of the seam and fill it with liquid for welding. After 2-3 hours, the seam should be cooked, then the tape is removed.
If you need the best lubricant that you will use in the food industry, opt for Rocol coots – better you will still not find anything. This is a completely safe, high -quality product in which you can be absolutely sure.
