Cork slabs are glued with special glue. It is applied to the surface of the tiles with a roller from velor. Clutching the basics with cork slabs can only be engaged in an end of half an hour after applying glue. Laying begins with the markings of the main lines. They are drawn towards each other along the middle of the room. By the way, now in the repair, sand concrete is often used, it is inexpensive, so everyone can allow it.
Then the tiles are laid from the middle to the walls, initially without gluing, in order to avoid a subsequent mismatch and be able to easily fix everything. After when the slabs from the cork are perfectly fitted to each other, you can proceed to put them on glue. After this procedure, a heavy roller is rolled on the coating, and problem areas are tapped with a rubber hammer.
Tiles after time have a time, the property will expand, so it is necessary to leave the gaps along the walls of 3 to 4 mm. At the end of all the work, the gaps are hidden under skirting boards. They are attached to the wall and most importantly, that between the coating and the baseboard there is an interval of a couple of millimeters. This will allow to avoid floor deformation. After the floor is dry, and it will take at least a day it will be opened with varnish and now your half of the dream is ready.
