The construction of the fence begins with the marking of the site. In places where the pillars will be installed, we score pegs at the same distance from each other clearly along one line. At this stage, we determine the place for the gate and the gate. If the future fence will stand parallel to the neighboring one, it is better to retreat from the border of your site five centimeters by five. For pillars, drill holes with a manual drill, the depth of which is 70-90 cm. On heaving soils, the depth should be at least 120 cm. Immediately install the first and last pillars, strengthening them with wooden wedges. By the way, it will not be superfluous to install door closers now they are popular. Between them we pull on the cord along which the rest of the pillars are installed. Having checked all the pillars in height, you can fall asleep with stones broken by brick or gravel. We fall asleep this mass with coarse -grained sand, having previously tamped well. Pour thoroughly with water on top. Then lay the concrete screed on top. If at the place of construction of the fence the Earth is leaning, then the pillars must be installed different lengths.
The next work depends on the type of material selected. For example, installing a wood fence takes less time and time. Pillars are connected by special runs, boards are attached to them. And all – the fence is ready! Stone or brick fence requires laying a strip foundation. It is such a trench that is filled with concrete solution. And before mounting the enclosing part, you need to wait for the solution to completely grasp.